Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SL175 Project
11-28-2013, 10:33 PM
Post: #1
SL175 Project
Well. . . .here it is. My next project, a 1970 SL175 (with a title!). I got it like this.
[Image: 1477350_562139490520835_632870473_n.jpg]
[Image: photo.php?fbid=562139503854167&s...048%2C1536]
[Image: 1463141_562139613854156_1166446571_n.jpg]
[Image: 1479037_562139670520817_13321922_n.jpg]
[Image: 1470389_562139697187481_1596072316_n.jpg]
The heads have been done (valves ground), carbs gone through, new battery installed, and engine assembled, all done by Farmer. The donor engine gave up the jugs and head. The original bike (being rebuilt) had a bolt between the fins bent around to hold the exhaust on, as the previous owner (twice previous owner, that is. Not Farmer.) had broken off an exhaust stud. So far, I have only checked and adjusted points gap and ignition timing, which was only off a little. Next to do is fix the kick start gears and see if it has spark. If it does, I'll put a tank on it and get it running. It'll be a reasonably smooth project (knock on wood). I can see new cables, tires, and a few rubber parts needing replacement/to be found, but I'm not too worried about that. I plan on making this a survivor bike. I won't be doing any dent removal, and only painting things that have to be painted to keep the rust at bay.

You can also follow my rebuild project on my youtube channel http://www.youtube.com/korysrides I don't have any videos of it up yet, but I plan on starting in on it soon. After I get Christmas presents built for my family, that is.

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
12-14-2013, 04:25 AM
Post: #2
RE: SL175 Project
Update. Got the title transferred, custom plate on the way, and have some parts ordered.







http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
12-18-2013, 02:22 AM
Post: #3
RE: SL175 Project






http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
01-07-2014, 02:02 AM
Post: #4
RE: SL175 Project



http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
01-12-2014, 04:30 PM
Post: #5
RE: SL175 Project
I was home sick with a bad cold, and on day 2 felt better and got a few things done on the SL. While out in the garage, I started getting a little dizzy. I thought it was just the fact I was using the parts washer and had a propane heater on. I went outside for a while. I got up off the steps 5 minutes later, and was still dizzy. I shut the garage down, went inside, and took a shower. Still dizzy. Went to bed with my head swimming. Woke up this morning, and had to have my girlfriend take me to the hospital. Turns out I have positional vertigo, and there is no cure other than time. I have meds for the dizziness and nausea. I don't think I'll have any progress for a week or so, unless I can really heal fast.

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
01-14-2014, 10:12 AM
Post: #6
RE: SL175 Project
try these: http://www.bing.com/search?q=positional+...=2&sc=8-18
Find all posts by this user
Quote this message in a reply
01-30-2014, 01:15 PM
Post: #7
RE: SL175 Project
When I went to upload the 2nd set of videos from my camera to my laptop, there was a static shock that killed the camera and power supply on my computer. I lost a lot of video, so what I say I'm going to do in the beginning of the video doesn't all get done. $350 later I have a new camera and power supply.



http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
02-09-2014, 06:15 PM
Post: #8
RE: SL175 Project



http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
03-09-2014, 10:26 PM
Post: #9
RE: SL175 Project
It lives! Almost . . .I think the carbs are out of sync. Also, there is a small exhaust leak I need to fix. Other than a few cosmetic items and the carb sync, it should be all good to go!




http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
03-10-2014, 12:05 AM
Post: #10
RE: SL175 Project
so was it fuel or spark that cause your walk home?

GLMC # 74
http://evoscot.blogspot.com/
Evo chopper
1996 FLHTCU
2005 XLH 1200
1988 XR250R
Find all posts by this user
Quote this message in a reply
03-10-2014, 07:07 AM
Post: #11
RE: SL175 Project
That's great Kory , good to see it back together and running. Great old bike, glad it is in good hands.

Farmer
GLMC #83
AMA 912782
IBA 45569

GL 1500I
KLR 650


NRA
IFC
Find all posts by this user
Quote this message in a reply
03-10-2014, 06:15 PM
Post: #12
RE: SL175 Project
(03-10-2014 12:05 AM)Scot229 Wrote:  so was it fuel or spark that cause your walk home?

It's fuel. I think something got loosened up and went into the carbs. Can't get it started now but will dig into it

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
03-10-2014, 07:34 PM
Post: #13
RE: SL175 Project
Nice sound, while it lasted. Fun video!!
Find all posts by this user
Quote this message in a reply
04-25-2014, 10:03 PM
Post: #14
RE: SL175 Project
Been quite a while since the last update. It is running, but only makes it 3 blocks and then fuel starves. I've had the carbs apart several times, and I think it might be flooding the right side carb. Still working on it, but getting frustrated. Might need a side project to work on for when I get too light headed on carb cleaner-ing the SL.

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
04-27-2014, 08:30 AM
Post: #15
RE: SL175 Project
Partially sunken float. I didn't hear anything inside the float, but when I put it on the bench a little gas leaked from it. Hopefully that will fix my problem.

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
04-27-2014, 08:38 AM
Post: #16
RE: SL175 Project
was there any good spares?

Farmer
GLMC #83
AMA 912782
IBA 45569

GL 1500I
KLR 650


NRA
IFC
Find all posts by this user
Quote this message in a reply
04-27-2014, 02:09 PM
Post: #17
RE: SL175 Project
The spare carb is for the XL100, but I found a spare at my favorite motorcycle graveyard.

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
04-29-2014, 08:55 PM
Post: #18
RE: SL175 Project
The SL is almost done and ready to ride. Good news is . . .I have my next projects lined up too. One is a trebuchet to throw tennis balls because Grandpa isn't quite as spry as he used to be, and the Boston Terrier acts like a 5th grader on a sugar high. The project after that . . . . .the bike with the engine may look familiar to some of you. It has been in a GLMC event.
[Image: 10153057_633904173344366_1749295864194411276_n.jpg]

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
05-10-2014, 08:12 PM
Post: #19
RE: SL175 Project
Filters caught on fire! The SL is mostly ok though.
[Image: 10363558_639695162765267_6578846605282802913_n.jpg]

[Image: 10314763_639695166098600_74218120514763586_n.jpg]

http://www.youtube.com/korysrides
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Club Project South Shore Video Lapchik 12 50,776 01-24-2016 04:25 PM
Last Post: Lapchik
  Off Road Generator Cart Project Lapchik 3 20,218 04-12-2015 08:33 PM
Last Post: Lapchik
  Winter Project Pictures Lapchik 6 29,701 02-20-2015 12:11 PM
Last Post: Frump
  Lapchik's Custom Project Lapchik 3 20,058 03-24-2013 03:49 PM
Last Post: Lapchik

Forum Jump: